Description
One 5" touchscreen on your desk. Every printer you own, live, whatever its brand.
Tiger Touch is the BIGTREETECH Panda Touch running Tiger Touch, the free, open-source firmware of the TigerSystem ecosystem. It signs in to your free TigerSystem account, finds every printer you declared there and follows each one directly, over its own protocol, all at the same time: Bambu Lab, Creality, Elegoo, Anycubic, Snapmaker, FlashForge, Prusa, and any Klipper or OctoPrint printer.
You install the firmware yourself
The screen ships with the BIGTREETECH firmware (made for Bambu Lab printers). To turn it into a Tiger Touch, you install the Tiger Touch firmware yourself, from your browser, in a few minutes: no soldering, nothing to open, nothing to print. You can go back to the BIGTREETECH firmware at any time.
Install Tiger Touch Read the Tiger Touch guide
What you get
|
1 × BIGTREETECH Panda Touch A 5-inch touchscreen with Wi-Fi and a built-in battery, delivered with the BIGTREETECH firmware. It is the hardware Tiger Touch was made for. |
|
The Tiger Touch firmware: free, open source, to install yourself MIT licensed, no subscription. It is not pre-installed: you flash it from your browser (see below). |
What it does
- Every printer on one screen, as live cards or as a list: status, progress, time left, temperatures, filament slots.
- Pause, resume, stop (after a confirmation) and switch the light. It does not start a print or heat a printer, on purpose.
- Cloud or LAN: Bambu Lab through the Bambu cloud or in LAN mode, Anycubic through the Anycubic cloud or on the LAN, using the sessions your TigerSystem account already holds.
- No computer left on, no Raspberry Pi, no server in between: the screen talks to your printers directly.
- 11 languages and updates over the air: the screen checks for new versions and installs them in two touches, keeping your Wi-Fi and account.
Installing it, step by step
- Declare your printers once in Tiger Studio Manager. Install the free desktop app (Windows, macOS, Linux), create your TigerSystem account and add your printers: it finds them on your network. Tiger Touch reads that list, so it never asks for an address or an access code on the screen.
- Flash the screen from your browser. On a computer, open the Tiger Touch installer in Chrome or Edge (WebSerial: not Safari, not Firefox, not a phone), plug the Panda Touch in with a USB-C cable, press Install and pick its serial port. Replacing the BIGTREETECH firmware: tick Erase device.
- Follow the screen. Language, Wi-Fi, then your TigerSystem account (e-mail and password, or Continue with Google with a QR code). Switch on the printers you want to follow, and that is it.
First time? The guide covers the USB driver (required on macOS) and keeping a copy of the BIGTREETECH firmware so you can go back.
Download Tiger Studio Manager See the install guide
Your screen, your printers, an open project
The BIGTREETECH hardware and a free, MIT-licensed firmware to follow all your printers from one place, whatever their brand.
Install Tiger Touch
Tiger Touch (BIGTREETECH Pa...
Recevez une notification lorsque cet article est de nouveau en stock
Appuyez et faites glisser pour voir